Products

PHOTOBIO Advanced Quantum PAR Meter Product Details All new for 2020, the Advanced Quantum PAR Meter provides accurate and cost-effective measurement for all light sources used to grow plants.  The PHOTOBIO by Phantom Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. There is a proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis in plants, which is important for horticultural studies and monitoring plant physiology. The Advanced light meter comes complete with a remote sensor, two connection cables, the main unit and easy to replace AAA batteries. The PAR meter can store up to 99 measurements for easy reference.  Portable PAR meter with highly accurate remote quantum sensor Measures photosynthetically active radiation (PAR) from 400 to 700 nm Simple and easy to use Record up to 99 readings Includes short coiled and long straight connection cables   Instructions 

Read more less

PHOTOBIO MX 16' Remote Driver Mounting Kit (White)   Product Details PHOTOBIO MX 16' Remote Driver Kit allows the power supply to be mounted remotely separate from light emitting portion.   Contain: (2) 16' WT IP65 DC cable (1) Truss hanger

Read more less

 PHOTOBIO MX 680W 100-277V S4 spectrum w/ iLOC   Product Details   Extraordinary performance. Extreme efficiency. Exacting design.The PHOTOBIO•MX changes everything. We took a step back, evaluated all the fixtures on the market, and then set out to do things entirely different. The result is a 680W fixture delivering 15% more light to your canopy, using 35% less power than a 1000W DE fixture. Increase yields while driving down operational cost. The spectrums were developed in a private research laboratory to drive flower yield and elicit market desirable traits in short day resin producing crops. PHOTOBIO•MX abandons the bar style concept in favor of a more efficient contiguous circuit board to deliver unparalleled PPFD uniformity to the canopy. Extensive thermal modeling and testing was conducted to ensure diodes remain well below operating temperature to maintain consistent light output and yields. 0-10V PHOTO•LOC Light Output Control allows you to precisely regulate the amount of light delivered to your plant canopy when paired with the available Autopilot PX Series controller. The iLOC Integrated Light Output Control on board dimming knob allows the grower to adjust the photon output intensity to accommodate the various stages of plant growth for optimal photosynthesis activation. With the knob adjusted to 100% using 240V, the MX uses 664W and puts out 1700 μmol/s photon flux (PPF). With the knob adjusted to 40%, the MX uses 270W and puts out 40% of the photon flux.  The high efficiency S4 spectrum does not change when using the dimmer knob and still provides ideal red to blue ratio for vigorous growth and maximized flower development. PHOTOBIO•MX’s design is multilayer rack centric, providing the ability to double or triple your canopy square footage within your existing structures footprint. The driver is mounted below the fixture to maximize vertical grow space and has the ability to be remotely mounted. PHOTOBIO•MX is designed for the serious horticultural professional looking to increase business sustainability by reducing power consumption while simultaneously improving crop performance and yield.  The PHOTOBIO•MX is also a qualified product listed with DLC, which makes the fixture eligible for energy rebates for futher cost savings while also saving significant energy while optimizing plant growth and health.   FEATURES: 1768 umol/s Photon Flux @ 277V 2.6 µmol/J Efficacy @ 277V iLOC Integrated Light Output Control allows manual adjustment of light output Settings are 40%-55%-70%-85%-100%-PX Control Driver can be mounted remote Robust commercial design keeps LED's running cool Precisely control photon output when paired with Autopilot PX series controller (PX2 and above) Slim design maximizes vertical growing space with remote capable driver 100-277V Driver range IP65 wet location rated protection against water and dust Includes PHOTO•LOC signal cable Includes a voltage specific power cable chosen by the customer DLC listed (H-RR6RGRH) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project     Specifications Average Rated Life Hours: 50000 CE_Registration yes FCC_Registration yes Frequency: 50/60 Rated Wattage: 680 W ROHS_Registration: yes Weight (Unboxed): 47.50 Width (Unboxed): 44.00 Length (Unboxed): 43.30 Height (Unboxed): 1.78 Voltage: 100-277 V

Read more less

PHOTOBIO T 330W 100-277V S4   Product Details   PHOTOBIO•T high efficiency LED top light is designed for greenhouse and indoor applications. The slim design minimizes sun interference while providing greater access to the plant canopy. The ultra-effective commercial design utilizes a closed loop heat pipe cooling system to rapidly wick heat from diodes, providing superior heat dissipation and longevity. The high efficiency S4 spectrum provides ideal conditions for both human and plant health to deliver better working conditions and consistent crop quality. This fixture allows horticulture professionals increased performance and yields while maximizing ROI. Product Specifications: 858 umol/s Photon Flux @ 277V 2.6 µmol/J Efficacy @ 277V Ideal for sole source indoor and supplemental greenhouse applications Thin linear top light design minimizes sun interference in greenhouses while providing better canopy access when applied indoors Highly effective heat pipe cooling system provides superior heat dissipation Precisely control photon output when paired with Autopilot PX series controller (PX2 and above) Driver can be mounted remote IP65 wet location rated protection against water and dust 100-277V Driver range DLC listed (H-3WMUH6G) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project   Specifications Average Rated Life Hours: 50000 Ballast Type: PHANTOM 100-277V CE_Registration: yes FCC_Registration: yes Frequency: 50/60 Rated Wattage: 330 W ROHS_Registration: yes Weight (Unboxed): 10.00 Width (Unboxed): 5.00 Length (Unboxed): 23.60 Height (Unboxed): 7.50 Voltage: 100-277 V

Read more less

PHOTOBIO TX 680W 100-277V S4   Product Details PHOTOBIO•TX high efficiency LED top light is designed for greenhouse and indoor applications. The slim design minimizes sun interference while providing greater access to the plant canopy. The ultra-effective commercial design utilizes a closed loop heat pipe cooling system to rapidly wick heat from diodes, providing superior heat dissipation and longevity. The high efficiency S4 spectrum provides ideal conditions for both human and plant health to deliver better working conditions and consistent crop quality. This fixture allows horticulture professionals increased performance and yields while maximizing ROI. Product Specifications: 1768 umol/s Photon Flux @ 277V 2.6 µmol/J Efficacy @ 277V Thin linear top light design minimizes sun interference in greenhouses while providing better canopy access when applied indoors Highly effective heat pipe cooling system provides superior heat dissipation Precisely control photon output when paired with Autopilot PX series controller (PX2 and above) Driver can be mounted remote IP65 wet location rated protection against water and dust 100-277V Driver range DLC listed (H-8BP06EV) and qualifies for utility rebates, which play a significant role in optimizing the cost effectiveness of a lighting project   Specifications Average Rated Life Hours: 50000 FCC_Registration: yes Frequency: 50/60 Rated Wattage: YES W ROHS_Registration: yes Weight (Unboxed): 24.50 Width (Unboxed): 5.00 Length (Unboxed): 42.25 Height (Unboxed): 7.50

Read more less

PHOTOBIO VP 18" Power Link cable, 18AWG (White)   Product Details PHOTOBIO-VP 18” Power Link Cable, 18AWG Hydrofarm offers a complete line of PHOTOBIO•VP LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs. The Power Link Cable allows linking of fixtures between aisles or levels on vertical racking systems. Features: Mini IP connectors allow safe "plug & play" power transmission and are dust and liquid resistant.   UV resistant power cable  

Read more less

PHOTOBIO VP White Cable Harness, 18AWG, 24" Leads     Product Details PHOTOBIO-VP 24” Leads Harness, 18AWGHydrofarm offers a complete line of PHOTOBIO•VP LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.For new construction: Utilizing a harness with bare wire leads wired directly into a junction box eliminates the cost of a traditional plug and receptacle while reducing contractor labor expense.    Includes 4 mounting clips, screws, and zip-ties for installation  

Read more less

Product Details Hydrofarm offers a complete line of PHOTOBIO•X LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.For new construction: Utilizing a harness with bare wire leads wired directly into a junction box eliminates the cost of a traditional plug and receptacle while reducing contractor labor expense.   For existing infrastructure: Harnesses are available with traditional plug heads. Features: IP connectors allow safe "plug & play" power transmission and are dust and liquid resistant.   The 10’ UV resistant power cable is white in color to maximize light reflectivity. Custom cable harnesses are available by special order. Contact your Hydrofarm sales representative for details.

Read more less