Products

SP BEL-ART "SPACE SAVER" POLYCARBONATE VACUUM DESICCATOR Degas liquids quickly and easily in the laboratory or classroom with this small plastic vacuum desiccator. These strong, shatterproof units provide dry storage and protection for sensitive products. Lighter and less costly than similarly sized glass models; does not chip like glass Holds a full vacuum (29.9" Hg) at room temperature for 24 hours Tapered polypropylene stopcock with PTFE plug (F42040-0000) accepts tubing with ¼ to ⅜” I.D. and allows a controlled entrance of air preventing unnecessary turbulence Neoprene O-ring assures a tight seal down to 0˚C without the need for grease (ring will not be harmed if grease is used) 'Flat Dome,’ clear polycarbonate top with large ribbed knob maximizes interior clearances and provides an average of 13% greater interior volume over standard hemispherical domes All models include a 0.32 cm (⅛") thick perforated plate; disposable or reusable desiccant can be placed on or under this plate  White polypropylene bottom models can support incandescent crucibles on Minerit HD High Heat Ceramic Desiccator Plates (series F42038)  Clear polycarbonate bottom models offer increased viewing visibility from more angles

Read more less

SP BEL-ART CELLULOSE FILTER PAPER DISCS (PACK 100) These heavy bond grade filter paper discs are custom-sized to fit Table-Top Buchner funnels and have a thickness of 0.30mm. Made from creped white cellulose to improve porosity Flow rate: 90ml per minute Wet burst strength is greater than 68 KPa; able to retain particles as small as 3 microns

Read more less

SP BEL-ART ECONOMY FRIGIMAT DRY ICE MAKER; U.S. MODEL, 14.75 X 5.5 X 6 IN. roduces a solid 454gm (16oz) block of dry ice in one to two minutes. Each 50lb. cylinder of liquid CO2 with a dip tube will make 8 or 9 blocks of dry ice measuring 9.2 x 10.4cmL (3⅝ x 4"). Polyethylene ice chamber is held in place by a metal clamping mechanism Porous polyethylene diffusion plate vents excess gas Built-in gas pressure gauge and relief valve Epoxy-coated steel frame has four non-skid rubber feet to prevent sliding Includes a 1.8m (6ft) nickel plated copper connecting tube with standard CGA 320 (0.830"-14) thread couplings for easy attachment to a LCO2 cylinder Overall dimensions: 37 x 14 x 15cmH (14¾ x 5½ x 6"); shipping weight: 3.9kg (8.5lbs)

Read more less

SP BEL-ART FRIGIMAT DRY ICE MAKER; U.S. MODEL, 12 X 6.5 X 5 IN. The Frigimat® eliminates the need to buy large quantities of dry ice when only a little is needed. It employs the Joule- Thomson effect to produce a solid 454gm (16 oz) block of dry ice in one to two minutes, and the block can be removed in just 30 seconds. Brass relief valve safely vents excess gas Each 50lb. cylinder of liquid CO2 with a dip tube will make 8 or 9 blocks of dry ice, each measuring 8.5cm (3⅜") x 11cm (4⅜") long Made of epoxy-coated steel with an aluminum ice chamber and brass valves with four non-skid rubber feet Includes a 1.8m (6 feet) nickel plated copper connecting tube with standard CGA 320 (0.830"-14) thread couplings for easy attachment to an LCO2 cylinder Dimensions: 30 x 17 x 13cmH (12 x 6½ x 5"); shipping weight: 5.5kg (12lbs)

Read more less

SP BEL-ART FRIGIMAT JUNIOR DRY ICE MAKER; U.S. MODEL Dry ice flakes are useful for packing around irregularly shaped items and are easily produced as needed with the Frigimat® Junior Dry Ice Maker. When the cylinder valve is opened about ¾ turn, LCO2 expands into the bag to create dry ice snow. The valve is then closed and the bag is ready to be removed and emptied. Brass nozzle screws onto any liquid LCO2 cylinder equipped with a dip tube Makes .77kg (1.7lb) of flakes per bag Cone dimensions: 13cmL (5") x 5.1cm diameter (2") at end Bag dimensions: 15W x 30cmL (6 x 12") Shipping weight: 0.54kg (1.2lbs)

Read more less

SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH COARSE POROSITY FIXED PLATE     Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process

Read more less

SP Bel-Art Polyethylene Buchner Table-Top Funnel with Coarse Porosity Removable Plate Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process

Read more less

SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH MEDIUM POROSITY FIXED PLATE Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process

Read more less

SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH MEDIUM POROSITY REMOVABLE PLATE Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process

Read more less

SP BEL-ART POLYETHYLENE BUCHNER TABLE-TOP FUNNEL WITH PERFORATED PLATE; 10.25IN. I.D., 8IN. HEIGHT Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process

Read more less

SP BEL-ART POLYETHYLENE POROUS FILTER PLATE; FOR 10.25 IN. I.D. BUCHNER FUNNELS   Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (½") I.D. tube and threads into ¾" NPT bung on the funnel Fixed or removable Fritware® Porous Filter Plates supported by a multiple ring grid; HDPE, 6.4mm (¼") thick, with a non-porous ring at the periphery of the plate which seals filter paper when used Fritware® Porous Filter Plates available in two porosities (medium and coarse); medium is 45-90 microns while the coarse is 90-130 microns; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Fixed or removable Perforated Filter Plates are made of 4.8mm (³/₁₆") thick HDPE with 4.8mm (³/₁₆") perforations on 11mm (⁷/₁₆") centers Perforated Filter Plates available in two versions (fixed or removable); fixed for coarse filtration or use with a cloth or paper filter; removable for use in precious metals recovery; use temperature range maximum 52ºC (125ºF), minimum -20ºC (-4ºF) Use the F36820-0118 Funnel Trowel to quickly and efficiently smooth fissures appearing during the filtration process

Read more less

SP BEL-ART SAFE-LAB THERMOMETER JOINT ADAPTER FOR TAPERED JOINTS, PTFE Teflon® PTFE body with Viton® O-ring for air tight vacuum work (Size 10/18 adapter does not have a body O-ring). Adapter has a threaded polypropylene screw cap on top with an inside O-ring for depth adjustment of 6-7mm for straight stem thermometers, glass tubing and other items Rotating the extracting nut removes the adapter from flask Not autoclavable

Read more less

SP BEL-ART TECHNI-DOME POLYCARBONATE GAS-PURGE DESICCATOR; 2.3 CU. FT. Generous quantities of standards, samples, electronics or other moisture-sensitive items can be protected in the Techni-Dome® 360 Vacuum Desiccator. A traditional style domed desiccator, the Techni-Dome® 360 is made from polycarbonate and offers a clear, unobstructed view of contents, with exceptionally large dry storage space, portability, and ease of use. Spacious 65 liter (4000 cu. in.) internal volume can hold items up to 45cm (18”) tall or wide, including racks, trays and instruments Two gas ports are tapered and accept tubing with ¼ to ⅜” I.D.; easy turning PTFE stopcocks facilitate turbulence-free entrance of gases, minimizing disturbance of contents Polycarbonate construction is resistant to most common chemicals, as well as thermal stress; wipes clean easily Includes two removable, polypropylene, 36.5cm(14.5”) and 22.5cm (9”) diameter shelves Side handles provide easy portability and can be used as a place to affix tamper-evident seals Gas ports can be closed to use desiccator with standard desiccant cartridges, F420450250, F420450200, F420480100

Read more less

SP BEL-ART TECHNI-DOME POLYCARBONATE VACUUM DESICCATOR; 2.3 CU. FT. This domed desiccator provides a roomy interior for large, moisture sensitive materials as well as portability and ease of use. Tapered stopcock accepts ¼" to ⅜” I.D. tubing and has an easy turning PTFE valve which allows for the gentle entrance of air and minimal disturbance to the inside chamber and its contents. Use to degas liquids, porous solids, or silicon molds to eliminate air bubbles  Spacious 65 liter (4000 cu. in.) internal volume can hold items up to 45cm (18”) tall or wide, including racks, trays and instruments Holds a full vacuum (29” Hg) at room temperature for 24 hours Laboratory grade polycarbonate provides a clear, unobstructed view of contents; resistant to most common chemicals and thermal stress Side handles provide easy portability and can be used to affix a lock or tamper-evident seals Gas ports can be closed to use desiccator with standard desiccant cartridges, F420450250, F420450200, F420480100 Includes two removable polypropylene shelves; 36.5cm(14.5”) and 22.5cm (9”

Read more less